Baller Head BETA Demo
The video below is the best example of how to use the "Wireless Baller Head"
Some tips:
I run it around 425-475F. I do a 10-30 second heat soak then load the bowl.
Small loosely packed, course ground bowl. Do not fill it up. The wireless if more about a couple quick hits off a small load.
The way I have it set up in the video seems to work well but there are multiple possible temp and configuration combinations. If you come up with some combinations or techniques please post on one of my social media accounts
Rebuild Instructional Video
If you have purchased a Wireless Vaporizer Handle
1. When installing the handle, squeeze the level open and slide over the top of the Quartz Heater. When open, the wire opening may temporarily deform. This is normal. Insert the heater at a slight angle to match the deformation.
2. Do not rotate the handle on the Quartz Heater when closed as it can scratch the Quartz.
3. Do not install the handle directly against the Quartz Heater flange. Allow a small gap to allow for thermal expansion.
Any updates on this in terms of availability?