The Glass & Quartz Cap
For best results, medium to course grind, light tamp
Please watch Lees video on preheating the bowl. This technique works really well and I have adopted it with all my devices - https://youtu.be/ime0XH6ncQY?si=88Lc4VW6uz7MFl8h
If you have purchased a Wireless Vaporizer Handle
1. When installing the handle, squeeze the level open and slide over the top of the Quartz Heater. When open, the wire opening may temporarily deform. This is normal. Insert the heater at a slight angle to match the deformation.
2. Do not rotate the handle on the Quartz Heater when closed as it can scratch the Quartz.
3. Do not install the handle directly against the Quartz Heater flange. Allow a small gap to allow for thermal expansion.
I’m wondering if I can still get decent results with a significantly smaller butane torch?
I have a question I’d like to ask. Is there a way to heat this with a torchless method? I don’t have a torch and I am not a fan of having one and using butane and all that but if I could use something like a Cannabis Hardware Zenleaf Nova Wireless E-nail this would be an amazing setup especially with a 14mm joint :)
Another outstanding offering to people who want to vape cheaply, using simple kit, that’s as elegant as it is sustainable. Dave’s approach shows how expensive hi-tech solutions aren’t always needed to achieve huge efficiencies – and maybe that approach has potential beyond the manufacture of inexpensive glass vapes. Thank you again.