Wireless 18mm & 14mm Quartz Cap Demo
Thank you for purchasing a Wireless Vaporizer Handle
1. When installing the handle, squeeze the level open and slide over the top of the Quartz Heater. When open, the wire opening may temporarily deform. This is normal. Insert the heater at a slight angle to match the deformation.
2. Do not rotate the handle on the Quartz Heater when closed as it can scratch the Quartz.
3. Do not install the handle directly against the Quartz Heater flange. Allow a small gap to allow for thermal expansion.
The video below is the best example of how to use the "Wireless Coil Cap"
Some tips:
I run the 18 at 780F and the 14 at 725F. I do a 30+ second heat soak then load the bowl.
Small loosely packed, course ground bowl. Do not fill it up. The wireless if more about a couple quick hits off a small load.
I know there are other combinations of lower heat and more time heat soaking the bowl. If you come up with some combinations or techniques please post on one of my social media accounts
when will this be available? looking forward to trying this out! thanks.
When will the wireless handle be available?